Metal Cutting Band Saw Blades

Interested in finding some metal cutting band saw blades?  Band saws are a great tool when it comes to woodworking, they are essential to any project.  The only thing is with so much use, you’re going to wind up having to change the blades eventually.  So if you’re looking for some metal cutting band saw blades, your options are to either head to the nearest hardware store or Sears and pick some new ones up, or you could go online and compare and contrast many different types of metal cutting band saw blades quickly and easily and make your purchase there.

If you know what you’re doing, you can easily do the latter.  Purchasing online is now common place and in some cases preferred to going directly to the store.  You can often find much better deals online as well, especially if you’re buying items in bulk, you can get discounts you otherwise wouldn’t get from regular stores. 

As far as getting metal cutting band saw blades, you’re first going to have to figure out what kind of materials you will be cutting through, the stronger the material, the stronger the blade will have to be to cut through it without issue.

Now here are a few that you might want to consider picking up:

1.  Milwaukee 48-39-0531 Band Saw Blade Bi-Metal 24 Teeth Per Inch 44-7/8”

This one is on the cheaper end of the scale at $16.65, it is by no means the cheapest though as there are some you can get single blades under $10. 

When you pick this up you’ll get a 3 pack of bi-metal construction, 24 tooth blades.  These can be used for cutting stock that is up to 5/32” thick, use this with portable band saws that use 44-7/8” x ½” x .020” blades and you’ll be good to go. 

Milwaukee is a trusted company so you can be sure that blades you buy with them are going to require fewer changes than blades you buy elsewhere.  They mention on the description that in fact these should last up to 3x as long.

2.  Craftsman ½ x 114” Band Saw Blade, 14/18TPI, Regular Tooth Bi-Metal Back

Here’s another one to consider at $55.99 at Sears.  This is to be used for cutting either mild or hard steel as well as non-ferrous metal. 

Craftsman is another trusted name as well known to produce high quality equipment and blades.

3.  PS Wood Timber Wolf 99 ¾” x ¾” Band Saw Blade

This one retails for $27.15, it fits the Craftsman 14” band saw, is made of silicon and low carbon steel, has low tension, thus requiring less HP and it has milled teeth.

One reviewer mentions this blade does a great job of sawing 7.25” mahogany into 3/32” slices when used on a Craftsman 14” bandsaw with a 1Hp motor.  The cuts left were pretty smooth and didn’t waste much wood.

There are other metal cutting band saw blades out there, and Its recommend you do additional research before you settle on one for your needs.